The role of the excavator in various projects can not be underestimated, it can replace the manual loading and unloading, handling, greatly saving manpower and material resources, in the wood handling, the excavator needs to install the grabber. The wood grabber is specifically designed for the excavator and is very practical in practical work. So, how is the grabber installed on the excavator? Today, Xiaobian will introduce you to the steps of installing the grabber.
The wood grabber is divided into mechanical wood grabber and rotary wood grabber. The mechanical wood grabber can be used without modification of the excavator pipe and hydraulic system (low cost type); the rotary wood grabber needs to be modified with excavator pipe and hydraulic system. To achieve the needs of 360 degree rotation (convenient, practical, high cost type).
Wood grabbing installation steps
(1) Mechanical excavator excavator grabber: push the excavator bucket cylinder without additional hydraulic block and pipeline;
(2) 360° rotary hydraulic type excavator grabber: two sets of hydraulic valve blocks and pipelines need to be added to the excavator to control;
(3) Non-rotating hydraulic-type excavator grabber: It is necessary to add a set of hydraulic valve blocks and pipelines to the excavator to control.
Installing the grabber is actually very simple. You just need to follow the above steps to install the gripper correctly. In the handling of bulk materials such as wood, the wood grabber can be better handled and loaded and unloaded to prevent falling in the middle.
